Home > Supported File Formats > 3D Studio to OBJ

How to convert 3D Studio (.3ds) to OBJ (Wavefront .obj,.mtl)?

PolyTrans|CAD+DCC performs mathematically precise CAD, DCC/Animation, GIS and BIM 3D file conversions into all key downstream 3D packages and file formats. Okino software is used and trusted throughout the world by many tens of thousands of 3D professionals in mission & production critical environments, backed by respectable personal support directly from our core development team.

3D Studio

The .3ds file format was the native file format of the old Autodesk '3D Studio R1-R4' software, which was popular up to about 1996 before its successor (3ds Max) replaced it. The file format is a dated, 16-bit, obsolete format. It is limited to triangle geometry, 65536 polygons per mesh, no vertex normals for accurate smoothing, 8.3 DOS filename naming and a maximum of 10 characters for object names.

Please do not confuse the .3ds format with the 3ds Max .max format. You will find throughout the 3D industry that some companies refer to .3ds as the "3ds Max file format" but this is not true. The native file format of 3ds Max is the .max format, whereas .3ds is just a legacy import/export file format ported over to 3ds Max by Tom Hudson during the transition from 3D Studio R4 back in the early 1990s. DO NOT use the .3ds file format to convert to/from 3ds Max but rather use Okino's dedicated PolyTrans-for-3dsMax plug-in system for 3ds Max.

OBJ

Wavefront OBJ is a little understood but highly used and prevalent 3D "polygonal mesh" file format used throughout the 3D graphics world. Okino, Alias Research and McNeel made it popular in the early to mid 1990s as a general purpose, simple-to-read, storage and transmission 3D file format, especially for the then-new companies who began to sell 3D mesh models via the Internet.

Relatively speaking, OBJ is a rather simple file format but a bit better than STL although similar to the more modern 3MF format.The OBJ format allows for 1 or more unique polygonal mesh objects to be defined, each with optional UV texture coordinates and vertex colors. Material definitions can be linked to the mesh geometry as defined in the separate 'MTL' file. The material definitions are rather simple (ie. no PBR material support) but acceptable, and with varied levels of texture mapping support. OBJ format does not provide support for object hierarchy, local transformations, meta data, lights, cameras, skinning or animation. Most notably, OBJ does not allow for 'object instancing' and hence 1000 copies of a screw would be saved to OBJ as 1000 explicit copies, rather than 1000 references to one master object.

A short history: In the 1980s there was a program called Wavefront Visualizer which ran on UNIX and ran its early rendering pipeline as a series of tee'd command line 'applets'. The data flowed from one applet to another via various ASCII based files - OBJ for geometry, MTL for materials and other ASCII files for animation, skinning, deformation, etc.

Okino knows of the Wavefront OBJ file very well as it provides the one and only full implementation of the OBJ file format and with the ability to consume exceedingly large OBJ files quickly and efficiently. This includes the only known implementation of OBJ-centric 'NURBS geometry' (surfaces and curves) within the OBJ file format (which is little or not used) other than that from the McNeel Rhino-3D software.

3D Studio import converter's overview

OBJ export converter's overview