Home > Supported File Formats > CADMATIC to 3ds Max

How to convert CADMATIC (3DP) to 3ds Max (.max)?

PolyTrans|CAD+DCC performs mathematically precise CAD, DCC/Animation, GIS and BIM 3D file conversions into all key downstream 3D packages and file formats. Okino software is used and trusted throughout the world by many tens of thousands of 3D professionals in mission & production critical environments, backed by respectable personal support directly from our core development team.

CADMATIC

Okino and Cadmatic have collaborated for many years to create a fluid 3D conversion pipeline from Okino's CAD importers into Cadmatic 3D Plant software. This is achieved through a custom 3D export converter module for Okino software which creates "3DP" files. Such files can then be loaded into Cadmatic's 3D plant design software.

This custom solution allows Cadmatic users to source from all primary MCAD and CAD programs, resulting in highly optimized, clean and robust 3DP files. Commonly requested source MCAD programs include SolidWorks, ProE/Creo, IGES solids, STEP solids, PARASOLID solids, DWF-3D, (for the technically best AutoCAD, NavisWorks, Revit, Inventor conversions) DXF/DWG, JT and basically all other top named MCAD programs.

The 3DP Exporter plug-in for Okino software is developed and maintained by Cadmatic. Please contact them directly to obtain the 3DP installer.

If you wish to convert from the Cadmatic 3D Plant software into other BREP solids modelling programs (such as SolidWorks, Unigraphics NX, Siemens Team Center, ProE/Creo CATIA, etc.) then please contact Cadmatic directly for their speciality methods and processes. Such processes are not provided by Okino software as its requires special processing of data from the 3D Plant software. As examples, Cadmatic 3D Plant can export JT "solids-based" files for Unigraphics NX and Siemens Team Center, while the use of a local copy of AutoCAD allows Cadmatic 3D Plant datasets to be converted into "solids" for Autodesk Inventor and other programs.

3ds Max

3ds Max has been the flagship DCC/Animation system of Autodesk since its introduction in 1996. It replaced 3D Studio R1-R4 which was a DOS based variation. Both were developed by the Yost Group and licensed to Autodesk.

As is very little understood, no program on this planet can read or write 3ds Max ".max" files because the full geometry modifier stack of the 3ds Max software, and its various plugin modules, are needed in order to properly evaluate the file before it can be rendered. This is what forced Okino to write its PolyTrans-for-3dsMax system, which allows for all Okino 3D converters to run within 3ds Max itself. For example, if you want to convert to/from CINEMA 4D (.c4d files) then you would do so entirely inside of 3ds Max.

Okino has a very long history with 3ds Max as it got on board in 1986 when Tom Hudson (of the Yost Group) first released "CAD-3D" on the Atari|ST computer. That program morphed into 3D Studio on DOS (.3ds file format) and then into 3ds Max (.max file format).

Note: Please do not confuse the 3D Studio's .3ds format with the 3ds Max .max format. You will find throughout the 3D industry that some companies refer to .3ds as the "3ds Max file format" but this is not true. The native file format of 3ds Max is the .max format, whereas .3ds is just a legacy import/export file format ported over to 3ds Max by Tom Hudson during the transition from 3D Studio R4 back in the early 1990s. DO NOT use the .3ds file format to convert to/from 3ds Max but rather use Okino's dedicated PolyTrans-for-3dsMax plug-in system for 3ds Max.

PolyTrans|CAD for CADMATIC

CADMATIC import converter's overview

3ds Max export converter's overview