Home > Supported File Formats > DWG to DGN

How to convert DWG (AutoCAD, DXF) to DGN (MicroStation)?

PolyTrans|CAD+DCC performs mathematically precise CAD, DCC/Animation, GIS and BIM 3D file conversions into all key downstream 3D packages and file formats. Okino software is used and trusted throughout the world by many tens of thousands of 3D professionals in mission & production critical environments, backed by respectable personal support directly from our core development team.

DWG

DXF and DWG are the native file formats of the Autodesk AutoCAD product since 1982. DWG is the binary file variation to the ASCII DXF file format. These files can be viewed by many programs including Autodesk's free DWG TrueView application. It is a closed file format but has been documented by the Open Design Alliance.

At Okino we consider DXF/DWG to be one of the worst 3D file formats when translating 3D model data between applications (depending on its contents). There is very little understanding about this in the 3D graphics world. As outlined in our "CAD Data Sourcing Suggestons and Rules" page you should ideally use the DWF-3D file format when sourcing from either AutoCAD, Navisworks, Revit and optionally Autodesk Inventor.

Due to deep history, Autodesk software can embed ACIS SAT "BREP solids" data in some of its DXF/DWG files. This is the ideal case as the "BREP solids" geometry definitions lead to cleaner and higher fidelity MCAD file conversions. But even so, it would generally be a safer bet to use a STEP AP214 or "IGES BREP solids" file in such cases.

DGN

DGN is a 2D/3D file format, with its roots going back to the early 1980s, that is used as the native file format of such programs as Bentley's MicroStation and Intergraph's PDS software packages. Relative to deep history, DGN could be considered a competitor or rival to the Autodesk DWG file format. Okino considers both DGN and DWG rather "crude" and old file formats, depending on what vintage of file is used and whether the files contain ACIS-SAT/Parasolid "BREP solids" geometry or just 2D/3D vector geometry.

Okino considers a DGN V8 file to be of two varieties: (1) "GIS" like models defined using basic primitives like lines, curves, arcs and 3D objects defined by the extrusion and revolution of these basic elements - these types of files are typically glutted with an enormous number of basic elements which can result in massive scenes that can very slow to display and take up a lot of memory. (2) The second variety of DGN file uses the more modern "BREP solids" geometry type to define the 3D objects as lighter weight and more efficient NURBS surfaces and solids.

Okino spent over 20 years developing its DGN importers and exporters. As such, we understand the nuances of DGN and its related conversion issues. Please refer to our DGN importer WEB page which has extensive information on (1) the history of DGN and when to use DGN, (2) how to import massive DGN files (such as PDMS 3D plants, oil refineries, etc), (3) how to import from AVEVA PDMS and Intergraph PDS, and (4) our suggestions about using STEP or VRML2 as alternative conversion methods from Bentley's MicroStation.

DWG import converter's overview

DGN export converter's overview