Home > Supported File Formats > Navisworks to DWG

How to convert Navisworks (NWD,NWC,NWF) to DWG (AutoCAD, DXF)?

PolyTrans|CAD+DCC performs mathematically precise CAD, DCC/Animation, GIS and BIM 3D file conversions into all key downstream 3D packages and file formats. Okino software is used and trusted throughout the world by many tens of thousands of 3D professionals in mission & production critical environments, backed by respectable personal support directly from our core development team.

Navisworks

Autodesk Navisworks products deliver project review software for 3D coordination, 4D planning, photorealistic visualization, dynamic simulation, and accurate analysis. Create a whole-project model by integrating design and construction information, including complex building information modeling (BIM), Digital Prototyping (DP), and process plant data. With Autodesk Navisworks project review software, you can collaborate, coordinate, and communicate more effectively to reduce problems during design and construction.

Navisworks is a key and core product from which Okino customers often receive and/or coordinate their data files. At Okino we have spent the good part of 2 decades writing our DWF-3D importer specifically to import super-ultra-massive files from Navisworks datasets, such as oil & gas rigs, oil refineries, 3D plants, marine vessils, etc.

Note: you would ideally pre-center the model at the origin and pre-scale the model to be of a "sane size" within Navisworks before exporting the DWF-3D file for Okino software consumption. This will ensure that the model displays properly in your final destination 3D software.

DWG

DXF and DWG are the native file formats of the Autodesk AutoCAD product since 1982. DWG is the binary file variation to the ASCII DXF file format. These files can be viewed by many programs including Autodesk's free DWG TrueView application. It is a closed file format but has been documented by the Open Design Alliance.

At Okino we consider DXF/DWG to be one of the worst 3D file formats when translating 3D model data between applications (depending on its contents). There is very little understanding about this in the 3D graphics world. As outlined in our "CAD Data Sourcing Suggestons and Rules" page you should ideally use the DWF-3D file format when sourcing from either AutoCAD, Navisworks, Revit and optionally Autodesk Inventor.

Due to deep history, Autodesk software can embed ACIS SAT "BREP solids" data in some of its DXF/DWG files. This is the ideal case as the "BREP solids" geometry definitions lead to cleaner and higher fidelity MCAD file conversions. But even so, it would generally be a safer bet to use a STEP AP214 or "IGES BREP solids" file in such cases.

DWF import converter's overview

DWG export converter's overview