Bl
Bl
Bl
Bl
Bl
You are here:   Home »  Products »  PolyTrans|CAD+DCC  
Bl

Home > Supported File Formats > PRC to DWG


How to convert PRC (Adobe 3D PDF) to DWG (AutoCAD, DXF)?


PolyTrans|CAD+DCC performs mathematically precise CAD, DCC/Animation, GIS and BIM 3D file conversions into all key downstream 3D packages and file formats. Okino software is used and trusted throughout the world by many tens of thousands of 3D professionals in mission & production critical environments, backed by respectable personal support directly from our core development team.

     

PRC

PRC (Product Representation Compact) is probably one of the least known of 3D CAD file formats yet it forms the underpinning for Adobe Acrobat 3D PDF files. It may be considered the “silent younger brother of the more well known U3D file format”. It has a fairly long but little unknown history.

PRC is primarily used as a 3D file format to embed 3D data within a PDF file. It was originally developed by the TTF Group of France whom were purchased by Adobe in 2006. In 2014 PRC became an ISO published standard.

Okino's PRC geometry import converter reads in native PRC 3D CAD files. It will also extract PRC and U3D files from within any chosen page of an Adobe 3D PDF file. It is an intelligent and well implemented importer for all forms of complex source PRC CAD file data, including the import and processing of 3D mesh and BREP (solids) geometry, assembly hierarchy (incl. intelligent “proto node” handling), materials (with adherence to the PRC father/son inheritance rules), 2D bitmapped texture maps and meta data.

     

DWG

DXF and DWG are the native file formats of the Autodesk AutoCAD product since 1982. DWG is the binary file variation to the ASCII DXF file format. These files can be viewed by many programs including Autodesk's free DWG TrueView application. It is a closed file format but has been documented by the Open Design Alliance.

At Okino we consider DXF/DWG to be one of the worst 3D file formats when translating 3D model data between applications (depending on its contents). There is very little understanding about this in the 3D graphics world. As outlined in our "CAD Data Sourcing Suggestons and Rules" page you should ideally use the DWF-3D file format when sourcing from either AutoCAD, Navisworks, Revit and optionally Autodesk Inventor.

Due to deep history, Autodesk software can embed ACIS SAT "BREP solids" data in some of its DXF/DWG files. This is the ideal case as the "BREP solids" geometry definitions lead to cleaner and higher fidelity MCAD file conversions. But even so, it would generally be a safer bet to use a STEP AP214 or "IGES BREP solids" file in such cases.