Bl
Bl
Bl
Bl
Bl
You are here:   Home »  Products »  PolyTrans|CAD+DCC  
Bl

Home > Supported File Formats > SOLIDWORKS to DWG


How to convert SOLIDWORKS (.sldasm,.sldprt) to DWG (AutoCAD, DXF)?


PolyTrans|CAD+DCC performs mathematically precise CAD, DCC/Animation, GIS and BIM 3D file conversions into all key downstream 3D packages and file formats. Okino software is used and trusted throughout the world by many tens of thousands of 3D professionals in mission & production critical environments, backed by respectable personal support directly from our core development team.

     

SOLIDWORKS

Since the mid-1990s SOLIDWORKS has dominated the mid-tier MCAD solids modelling market amongst its closest rivals of ProE/Creo, Unigraphics NX, Autodesk Inventor and Solid Edge.

SOLIDWORKS has been Okino's #1 most requested and used MCAD importer (outside of STEP and IGES) for well over 25 years. We do not use reverse engineered technology, as commonly used by other companies, but rather license the real and actual runtime system from SOLIDWORKS Corporation on a yearly basis. This has allowed our SOLIDWORKS importer to remain entirely error free for over 25 years and is incredible fast to import and convert the most massive of assemblies.

Conversion from SOLIDWORKS is best handled via native .sldasm and .sldasm files, or equally well via STEP AP204 or "IGES BREP solids".

     

DWG

DXF and DWG are the native file formats of the Autodesk AutoCAD product since 1982. DWG is the binary file variation to the ASCII DXF file format. These files can be viewed by many programs including Autodesk's free DWG TrueView application. It is a closed file format but has been documented by the Open Design Alliance.

At Okino we consider DXF/DWG to be one of the worst 3D file formats when translating 3D model data between applications (depending on its contents). There is very little understanding about this in the 3D graphics world. As outlined in our "CAD Data Sourcing Suggestons and Rules" page you should ideally use the DWF-3D file format when sourcing from either AutoCAD, Navisworks, Revit and optionally Autodesk Inventor.

Due to deep history, Autodesk software can embed ACIS SAT "BREP solids" data in some of its DXF/DWG files. This is the ideal case as the "BREP solids" geometry definitions lead to cleaner and higher fidelity MCAD file conversions. But even so, it would generally be a safer bet to use a STEP AP214 or "IGES BREP solids" file in such cases.