Home > Supported File Formats > DWG to SpaceClaim

How to convert DWG (AutoCAD, DXF) to SpaceClaim (.scdoc)?

PolyTrans|CAD+DCC performs mathematically precise CAD, DCC/Animation, GIS and BIM 3D file conversions into all key downstream 3D packages and file formats. Okino software is used and trusted throughout the world by many tens of thousands of 3D professionals in mission & production critical environments, backed by respectable personal support directly from our core development team.

DWG

DXF and DWG are the native file formats of the Autodesk AutoCAD product since 1982. DWG is the binary file variation to the ASCII DXF file format. These files can be viewed by many programs including Autodesk's free DWG TrueView application. It is a closed file format but has been documented by the Open Design Alliance.

At Okino we consider DXF/DWG to be one of the worst 3D file formats when translating 3D model data between applications (depending on its contents). There is very little understanding about this in the 3D graphics world. As outlined in our "CAD Data Sourcing Suggestons and Rules" page you should ideally use the DWF-3D file format when sourcing from either AutoCAD, Navisworks, Revit and optionally Autodesk Inventor.

Due to deep history, Autodesk software can embed ACIS SAT "BREP solids" data in some of its DXF/DWG files. This is the ideal case as the "BREP solids" geometry definitions lead to cleaner and higher fidelity MCAD file conversions. But even so, it would generally be a safer bet to use a STEP AP214 or "IGES BREP solids" file in such cases.

SpaceClaim

SpaceClaim is a multipurpose 3-D solids modeling application providing efficient solutions to common modeling tasks. Built on the direct modeling technology, SpaceClaim removes geometry problems associated with various 3-D CAD operations, such as design or concept modeling, repair of translated CAD files, general model defeaturing, and complete model editing.

SpaceClaim provides for a good selection of 3D import and export file formats (which can be found on their "SpaceClaim supported formats" PDF file). Exporting from SpaceClaim into Okino software can be done with any number of 3D file formats such as: ACIS SAT, IGES (186-entities is best), JT, Parasolid x_t, Rhino 3dm, SketchUp, STEP, VRML or Wavefront OBJ. Out of this list a safe bet would be to use STEP AP214, IGES BREP solids (186-entities) or JT CAD files. For non-CAD files, either VRML2 or Wavefront OBJ.

Exporting from Okino software into SpaceClaim can be done with JT, Rhino 3dm, VRML or Wavefront OBJ.

DWG import converter's overview

Vist the SpaceClaim WEB site

JT export converter's overview