Bl
Bl
Bl
Bl
Bl
You are here:   Home »  Products »  PolyTrans|CAD+DCC  
Bl

Home > Supported File Formats > 3MF to DWG


How to convert 3MF to DWG (AutoCAD, DXF)?


PolyTrans|CAD+DCC performs mathematically precise CAD, DCC/Animation, GIS and BIM 3D file conversions into all key downstream 3D packages and file formats. Okino software is used and trusted throughout the world by many tens of thousands of 3D professionals in mission & production critical environments, backed by respectable personal support directly from our core development team.

     

3MF

3MF, 3D Manufacturing Format, is a modern replacement for the legacy STL (StereoLithography) file format with an explicit focus on the proper transmission of CAD and non-CAD model data for 3D printing as well as to downstream services and platforms. From Okino's long term perspective, the VRML2 file format was and is "just as good" for such requirements but never had the correct understanding nor traction since its introduction in 1995.

Features of 3MF over the legacy STL format includes: geometry instancing support, layered texture maps, multiple layers of UV texture coordinates, vertex colors and extended material types.

History, features, overviews, implementation partners and more can be read on the 3MF Consortium’s web site.

Note: Microsoft Windows uses the 3D Manufacturing Format (.3mf) for all 3D printing tasks.

Please also refer to the 3MF export converter for more information related to 3MF.

     

DWG

DXF and DWG are the native file formats of the Autodesk AutoCAD product since 1982. DWG is the binary file variation to the ASCII DXF file format. These files can be viewed by many programs including Autodesk's free DWG TrueView application. It is a closed file format but has been documented by the Open Design Alliance.

At Okino we consider DXF/DWG to be one of the worst 3D file formats when translating 3D model data between applications (depending on its contents). There is very little understanding about this in the 3D graphics world. As outlined in our "CAD Data Sourcing Suggestons and Rules" page you should ideally use the DWF-3D file format when sourcing from either AutoCAD, Navisworks, Revit and optionally Autodesk Inventor.

Due to deep history, Autodesk software can embed ACIS SAT "BREP solids" data in some of its DXF/DWG files. This is the ideal case as the "BREP solids" geometry definitions lead to cleaner and higher fidelity MCAD file conversions. But even so, it would generally be a safer bet to use a STEP AP214 or "IGES BREP solids" file in such cases.